analog control for a single axis stepper

[cstmwrks]

Hi Folks,
I've been hunting on line at most of the major motion control companies for a way to set up a NEMA 34 stepper in the 80 in lb range with a simple selector switch for 4 motion profiles and to have an analog style knob to vary the speed on the fly. No PC or monitor other than for initial set up. The closest I have found to an off the shelf remedy is the TECNIK clearpath all in one, though it is a servo motor.

Similar Threads:

• Build Thread- Two stepper motors on a single axis.
• Single axis control
• Need Help!- Need a circuit to control a single stepper
• single axis control?
• Software for single axis manual control?