Need Help!- mazak h400

[stefo]

Can i speed up the b axis on this machine?(1989 Mazak H400 6-Pallet)

B axis is the table indexer and it goes only by 1 Degree but it is very slow,
can i speed that up? i tried to search in parameters but no luck.

Thank You

[nwms306]

Originally Posted by stefo Can i speed up the b axis on this machine?(1989 Mazak H400 6-Pallet) B axis is the table indexer and it goes only by 1 Degree but it is very slow, can i speed that up? i tried to search in parameters but no luck. Thank You

The table speed is set by thr M/T parameters but be very careful as it is very easy to cause table positioning faults and also damage the MV Motor controller

[stefo]

i have took the manual of that machine and read the parameter description and i didnt see any parameter to describe what i need.

can you tell me which parameter it is.


Thank you

[nwms306]

Originally Posted by stefo i have took the manual of that machine and read the parameter description and i didnt see any parameter to describe what i need. can you tell me which parameter it is. Thank you

I believe you should find the M/T parameters in the front of the electrical drawing manual

[stefo]

in the electric drawing manual is everything on japanese,and that is a BIG problem

Thank you on your reply

[stefo]

I found a electric manual on english ,and you were right the table is turning faster when I changed the parameter,



Thank you,"nwms306," You are the best