Need Help!- Mazak Fusion 640 T Keyboard

[fbergski]

I need to connect a pc keyboard to my QT200 with a 640 T control. For some reason I was not able to install the pcmia network adapter and when I rebooted the machine it came up with a error. If I could "press any key to continue" I could get into the registry and fix the issue. The error is very common with Win95 and easy to fix.

Can anybody help me out?

Thanks,

Philip

[fizzissist]

open up the face of the control....there's a connector for the keyboard up around the top, towards the left as you're looking from the rear as I recall.

I'll open mine in the morning and double check..and post back here. Expect around 8am PST

It's easy.

[onthebumper]

There is a PS2 connection is on the back of the keyboard. It is located below the hard drive. The connector faces side ways. You'll have to reboot so that the PC recognizes the keyboard.

[fbergski]

Problem fixed, thank you for the help .

Philip

[rick_7037]

I would love to know how the error was fixed i just got the same error!!!

[fbergski]

I solved the problem by properly installing the pcmia network card. You'll need the keyboard attached to your machine to do this.

Philip