| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-19-2010, 07:27 AM
| |||
| |||
Hi, we have mazak lathe with T32-2 control that lost parameters due to battery death. Machine was brain dead not reacting to any buttons. Using reinitialzng procedure found here in other thread we managed to bring it back into life. Butons were lit and screen came up with message [parameter error]Available with machine parameters were typed manually and saved. Machine does not show any errors and reacts to all controls as it shoud. Except one - it does not perform Z-axis homing. I can still jog axis both sides but cannot get it homed. Chuck, tail, spindel jog, turret etc all work just fine. What it could be? Thanks for any help.  |
|
#3
02-19-2011, 03:33 PM
| |||
| |||
| Hello I have the same problem.. What did you do?? Please help thanks |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Y-axis not homing. | hotrob1 | Fanuc | 13 | 08-20-2009 07:35 PM |
| Homing a rotary axis? | Harryman | WinCnc | 1 | 12-24-2008 11:19 AM |
| Z axis homing problem | BillTodd | LinuxCNC (formerly EMC2) | 4 | 08-26-2008 02:55 PM |
| homing z-axis | wadero | General Metalwork Discussion | 1 | 08-20-2007 04:30 PM |
| Problem With Homing X Axis | elalto | Mach Software (ArtSoft software) | 1 | 09-15-2006 07:28 PM |
| | |
Linear Mode
