| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
09-02-2009, 08:16 AM
| |||
| |||
| The S01 0020 alarm points to an encoder problem. It should say which axis it is after the alarm. Try swapping the encoder with another axis and see if the problem follows. If it is too difficult to swap the encoders then try to swap the drive amplifiers in the electrical cabinet if they are the same size.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 310,320 alarms | CHANDRU | Fanuc | 2 | 11-28-2008 02:26 AM |
| Problem- M Plus Alarms | MJMark | Mazak, Mitsubishi, Mazatrol | 3 | 07-29-2008 03:39 PM |
| #105 & #163 alarms | Greg 24 | Haas Mills | 2 | 06-17-2008 04:54 PM |
| ALARMS 250 and 251 | Geof | Haas Lathes | 5 | 02-15-2008 09:32 AM |
| | |
Linear Mode
