Mazatrol binary viewer

[NCexplorer]

Hi, it's a problem to see the binary codes in mazatrol binary.
I have receipt some binary code sent from CNC mazak turing that using Mazatrol-t32-2.

If there is other way to convert/view the codes, please inform me soon.

Thanks for any contributions.

[psychomill]

No, that logic is not 'available'. If you have a Mazak, you can load it in the control to view the program or a CAD system that can translate the code (such as MatrixCAM and the like).

You can also output the program through Tape I/O instead and get a 3-digit G-code format which you can use the programming manual to decipher. Mazak's can output a Mazatrol program in G code but that was/is a control option. Can't remember if that was even available on the 32 controls.