Need Help!- Fusion 640T SQT 200MSY Y-AXIS

[Darchon]

Hi everyone.

We have a problem with our Mazak SQT 200MSY (Fusion 640T).
It started with a couple of lockups. I called our Mazak support and they sent us a new "computer", a FCU6-MU515-12.

Of course I managed to loose the parameters but we had an backup from when the machine was new.

Think I have most things right except..

I miss some sort of setting for the Y-axis. In the position window the position of Y-axis reads -*****.*** (hope you understand what i mean).

I can move the turret +Y but not -Y (120 Software limit -Y)
If I check the Servo monitor I get "MAC POS" -6108.23551 for 5 (y-axis)
changed A8 A9 to 999999 and -999999 but it didn't make any difference.

I cant move it by pressing overtravel release ether.

To clarify: the position of the y-axis is not written with any numbers it says "-*****.***" the position of the other axis looks like they should.

I gladly take any suggestions you might have!

[Darchon]

Fixed this by clearing the sram and restored the parameters.
Y-axis working now =)