VMC MAZAC V NEXUS 410 B

[fenix728]

HELLO GUYS ,CAN ANYONE PLEASE TELL ME WHAT'S THE SEQUENCE TO SET FEATURE OFFSET THE MACHINE IS A VMC MAZAC V NEXUS 410B CONTROL IS MAZATROL 640 C FUSION THANK YOU, AND IF SOMEONE KNOWS HOW TO THREADMILL IN SIMILAR CONTROL BUT THE MACHINES IS A MAZAC LATHE AND I NEED TO DO AN I. D. TRHEAD 2 INCHES OUT OF CENTER OF THE PIECE THANK YOU AGAIN FOR YOUR HELP,I APPRECIATE IT VERY MUCH.

[jimiscnc]

G code words and format are current state of the art for the standardized G code standards. 99% fanuc compatible is generally the case for mazatrol G code.

mazatrol WPC unit is analogous to G54 registers in G code. additionally, mazatrol has an offset unit that is similar to G52 daughter coordinate system.

also, WPC allows angle setting of your program and G54 does not!

jim