LinkBack URL
About LinkBacks
If it has been off for a while is the parameters OK? If you have any asterisks * on the screen or in the parameters, that indicates the parameters are lost.
If so, Hopefully you have a copy of the originals.
Al.
| | |
I have Mazak Slant turn 40N with Mazatrol-T Plus, Year 98-01 long time stopped. When I power up the alarm 33 Emergency Stop always showing on CRT I can not clear this alarm. Due to I have no any book with this machine. Any one here know how to solve the problem, please help.
If it has been off for a while is the parameters OK? If you have any asterisks * on the screen or in the parameters, that indicates the parameters are lost.
If so, Hopefully you have a copy of the originals.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Alarm 33 is a servo error. Check your drives?
It's just a part..... cutter still goes round and round....
Posting Permissions
| | |
