| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-08-2008, 12:47 PM
| |||
| |||
Hi guys! I have a problem with our nexus regarding the offset adjustments. Now, there's no problem when we are using mazatrol programs everything works fine but when we use eia/iso programs the machine won't read the offset values in the wear compensation and so we had to adjust to the toolset x and z if there's need for adjustments but i think that this is very unusual. Anybody here who could tell me what might be the problem? Thanks in advance.  |
|
#2
11-15-2008, 12:40 PM
| |||
| |||
the control doesn't read wear offsets for x,y,z from usual "LIST". there is "TOOL OFFSETS" button for addition offsets table (only for ISO). During automatic operation with ISO program control uses only geometry offsets from "LIST" and wear offsets from "TOOL OFFSETS" table. Tools definitions are not use, exclude maximum rotating for milling tools |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pc fusion 640t | strecha | Mazak, Mitsubishi, Mazatrol | 0 | 11-08-2008 10:00 AM |
| FUSION 640T BIOS | APEXWARRI | Mazak, Mitsubishi, Mazatrol | 1 | 01-22-2008 11:21 AM |
| Mazak Nexus QTN 640T | chattwo | Mazak, Mitsubishi, Mazatrol | 1 | 09-21-2007 07:58 AM |
| Mazak 640t time and date set? | CHEEVES | Mazak, Mitsubishi, Mazatrol | 6 | 10-12-2006 08:45 PM |
| PC Fusion 640T - fdd problem | nicolabucci | Mazak, Mitsubishi, Mazatrol | 6 | 09-06-2006 12:59 AM |
| | |
Linear Mode
