I'm currently running on a nexus 350ym and the machine is perfectly fine when you're using mazatrol program but when we use an eia/iso program, the machine doesn't read all the adjustments in the wear compensation. Anybody here who knows what might be the problem? The control is 640T. Thanks in advance.
basic question but, are you G-Coding 4 digits with each tool?
For instance, Tool #1 = T0101
Check for Tool digit errors as well. Sometimes, a tired programmer can slip in an alphebet "O" for a numeric "0" on a tool or part of code and it can be hard to spot.