need cable wiring PC to Mazatrol M32B

[chippah]

I have been sending and receiving programs
between my PC and Mazatrol M32B Vertical
mill. Somehow the wires got ripped out and
now we have not been able to get it rewired
correctly. Any help out there?
the PC is 9 pin and the Mazak is 25
It was the 9 pin that got disconnected.

[MrMazak]

9-25 pin NULL MODEM cable is all you need, CDW.com carries them as a stock item.

[dcoupar]

NC(DB25M) <----> PC (DB9F)

1 <- shield -> no connection
2 <----> 2
3 <----> 3
4&5 <----> no connection
6,8&20 <----> no connection
7 <----> 5