Need Help!- T-2 Parts Counter?

[stattp]

We have an old T-2 contol on a QT-15 Mazak lathe. Running EIA programs. I would like to turn on the parts counter and count my production. Works okay in Mazatrol programming, not in EIA. Any ideas?

Thanks....

[JAMMAN]

I don't know how to do that yet but is there any way I could get some programs from you with tool changes for reference? I'm talking to mine but haven't made a chip yet.

[stattp]

Sure, I'd be happy to. I'll include them as attachments. The machine is a quickturn 15, with onefacing tool and one boring bar for this particular program. Hope it helps.

[JAMMAN]

Fantastic! Exactly what I needed. Wish I could help you with the parts counter, If I come across the trigger I'll post it here.

Thanks again-
Jim

[stattp]

Glad I could help. My question isn't that much of a problem. I just had an operator who asked.

[chucker]

try this at the bottom of your program
#3901[#3901=#3901]+1
I think this is right I use it all the time when I get back to the shop tomrow
I will check to see if I posted it right if not I will repost it put it just above your M30 I also use it on My mills and change the +1 to how ever many parts are on my fixture

[stattp]

Thanks Chucker,

I'll give it a try as soon as I can get a free minute. Way too busy keeping regular product running through the shop when operators keep traxhing fixtures!

[chucker]

Sorry I did post it worng my memory in not as long as well never mind
#3901=[#3901]+10