new machine M70 controller small problem

[Beaker]

Our new machine finaly turned up V5-XP with mitsubishi M70 controll. But there is a small problem, the navi mill (conversational menu) is in chinese. Can't find anything in the manual to fix it.
Help much appreciated.

[onthebumper]

Chnage parameter 1043 to a 0. No need to power off and on. It should take effect immediately.

[cemturkmen]

Chnage parameter 1043 to a 0. No need to power off and on. It should take effect immediately.

Hey friends. As I see you are working with mitsubishi M70. I have some questions. I am using mastercam and other cam programs (edgecam ext). How the M70 CNC control compitable with the G codes which mastercam and other cam programs create?

What is the main diffrence between M70 and Fanuc 18iMB

[Beaker]

There is no problem with the m70 running programs from any cam systems as long as the post processor is correct. For mastercam the mpfan post is fine.
As for the difference between M70 and Fanuc18iMB i'm not sure but I do know the M70 runs Fanuc Macro B and G codes are the same as Fanuc.

[cemturkmen]

Thank you.