| | |
Having a hard time here changing my OP parameters on this little qt10. This lathe sat for a long time and the wheel and manual controls are MESSED UP! We changed all the parameters back to stock from our little work sheets but the OP parameters look wrong and their is no way to change them. Any help is much appreciated!
This pic was taken before we changed the other parameters so you can see how bad it was..LOL
I will try and scan in the procedure tomorrow. You have to set a write enable to completely clear mem. and enter the OP's .
and like I mentioned before the parity bit has to be entered.
It looks like the majority are messed up.
The procedure I have you clear the whole memory and re-punch everything back in.
As long as you have the original para. copy, I thought I had a sample T1 copy, but it gone.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Fwew Al that would be great! We have the original worksheets for the parameters
Procedure attached.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
AL I dotn have my chuck, tailstock or turret parameter dataI guess I never got a copy of that stuff. I will have to try and find it online.
Bummer no luck! The tool data and basic machine parameters are screwed up or missing. If someone has a working T1 on a qt10 please help.
When typing in the OP parameters you need to type all eight 1's and 0's then put the number of 1's last.
Examples
000100001
000100012
111111107
111111118
000011114
Posting Permissions
| | |
LinkBack URL
About LinkBacks
