mazatrol cam m2 alarms - CNCzone.com-The Largest Machinist Community on the net!

gasto · #1 03-26-2007, 10:48 AM

I'm running a mazak VQC20/40B. I'm getting alarm 20 NMI emergency stopped.
Does anyone know how to clear this alarm?

newguy81 · #2 03-26-2007, 02:48 PM

Check all your e-stop buttons. Do you have any other alarms on the diagnostics page. i.e. overtravel

gasto · #3 03-27-2007, 02:16 PM

No other alarms, I found the operator moved the Y-axis into the tool change zone which turns on a proximity switch & inhibits the manual feed near the toolchanger. I manually ran the axis off the prox. & regained control.
Thank you for your help!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mazak M-4 Mazatrol T2 and mazatrol Cam T2 operating manual in english	tuanpq	Mazak, Mitsubishi, Mazatrol	21	01-21-2012 07:33 PM
Fanuc 21-tb alarms	Hlynur	Fanuc	7	03-31-2010 12:08 AM
Fanuc OT alarms	cncmike92	Daewoo/Doosan	17	04-23-2007 07:57 AM
Haas VFE alarms	TGriz	Haas Mills	6	10-02-2006 01:01 PM
Fanuc 6MB 401 and 410 alarms	john braks	Fanuc	0	02-24-2006 12:45 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)