| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-11-2007, 07:06 PM
| |||
| |||
the mazak with the 32 controll. Icleaned the chips out lowered the z by 3.0 thied to send it home it stops when you let go of the switch . it still will not "0" the mach. sat for 2 1/2 years now I'm trying to run it.  |
|
#4
02-13-2007, 02:28 PM
| |||
| |||
| What machine is this on? You might have a prox switch thats not lighting to confirm....
__________________ It's just a part..... cutter still goes round and round.... |
|
#5
02-14-2007, 06:53 PM
| |||
| |||
| Call your local service office, they will talk you through the diagnosis of the problem |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| what fanuc controler do i have? | bcdracing | Fanuc | 3 | 03-21-2007 07:17 PM |
| mazak 32 controler | gosserwb | Mazak, Mitsubishi, Mazatrol | 2 | 02-11-2007 03:55 PM |
| cnc controler | gearcut | General CNC (Mill and Lathe) Control Software (NC) | 1 | 05-15-2005 09:46 AM |
| usb servo controler | miljnor | Servo Motors and Drives | 2 | 02-21-2005 12:43 AM |
| | |
Linear Mode
