Intergrex 400 III milling ques.

[ajl6549]

How do you "free" the milling spindle so you could indicate a bore in the side of a shaft? I'm not as familiar with this machine as I'd like to be but the opperator is telling me it can't be done. For the record it has a 640 mt pro control. And it's a 2005 model year machine.

[tool_man_tony]

Press the Machine soft key.
Press ATC Maintenance
Press MILL SP UNCLAMP

you are good to go

check this new forum out. It will have very useful information in days to come:

http://integrexmachinist.com/

[ajl6549]

Thanx I'll try it as soon as I get to work Monday morn. Also thanx for the link.

[ajl6549]

We tried that and as soon as we moved the spindle it went into e-stop? BTW we had the spindle in the horizontal pos.


A.J.L.

[cnclogistics]

Try the mcode M252 -Milling spindle unclamp
or describe the tool in mazatrol tool data as an endmill.