Mazak M-4 Mazatrol T2 and mazatrol Cam T2 operating manual in english

[tuanpq]

I need manuals in english for Mazatrol T2, Please help me

[ravin]

hello i am Ravin
which manual u need for mazatrol T2

[tuanpq]

Hello my name is Tuan, I live in VietNam.
I'm beginer in CNC machine.

I need manuals:
- Operating manual.
- Wiring diagram.
- Programming manual.
- Parameter list.

I have there manuals written by Japanese, but i don't know japanese so i need english manuals.

if u have there manuals in pdf file please send me.

thank you very mach.

[tuanpq]

Dear Ravin.

My email is tuanpqvn@yahoo.com

[weblogictech]

Hi Forum,

I have recently acquired a Mazak CNC Turning Center with Mazatrol T1 Controller. I have received the all manuals but unfortunately they all are in Japanese. The vendor told me that the machine is running, but after bringing the machine to my shop floor. I found that the machine is not working at all. The moment I give power to the machine, it breaks the main fuse. I am stucked and the engineer whom I contacted tells me he needs the manuals in English.

Anybody out there who have the english manuals. I want all the manuals, like Operator, Maintenance, Electrical, Ladder Logic, etc, etc..

Thanks and have nice day.

Regards,

Rizwan

[hoanganh94]

HI Tuan!

Minh doc duoc 1 it tieng Nhat, Model of your machine? Co the lap trinh cho may chay ...
Xin lien lac cho minh theo email nmha94@yahoo.com

[farzad taheri]

Originally Posted by ravin hello i am Ravin which manual u need for mazatrol T2

DEAR Mr. RAVIN
I need documents:
operating manual
programming manual
parameter list
electrical diagrams
drivers manual

of MAZATROL CAMM-2
TYPE: MELDAS-YM2B
my e-mail ftaheri5127@yahoo.com

[dano_st]

Originally Posted by ravin hello i am Ravin which manual u need for mazatrol T2

hi Mr. ravin..
i have mazatrol cam t2 and donn't have manual for it...
can you send:

-programming manual
-parameter list
-electrical diagrams
-drivers manual

my email : dano_st@yahoo.com

best regard

[javajesus]

I know that this thread is old, but I am getting a little desperate. I am looking for any manuals for my QT15 with a T-2 control. I have the electrical and maintenance, but thats it. If anyone can help, that would be great.

[paul barnes]

Originally Posted by javajesus I know that this thread is old, but I am getting a little desperate. I am looking for any manuals for my QT15 with a T-2 control. I have the electrical and maintenance, but thats it. If anyone can help, that would be great.

hi did you get any replys for your post?
i am going back to old job as turner and want to brush up on the T2 controll,as this is controller the company uses.

[javajesus]

there is a gentleman on the PM board that goes by mthoume I believe that has T2 manuals that he copied for me. I am sure that he would do the same for you. Just do a search for QT15 manuals.

[nedpet]

Hallo.I"m from Bulgaria .I need manuals in english for Mazatrol T2, Please help me