meldas 50 manual

[breazr]

Does anybody know a link to a MELDAS 50 operating manual (English version) ?

I only have the German version, and German language isn't by far my strongpoint.

Thanks

[Al_The_Man]

Try the MEAU site, they have alot of manuals in PDF now.
Al.

[breazr]

I'll checked the MEAU site, but without any success.
Radu

[MetLHead]

Try this one:

http://www.meau.com/Files/BNP-B2180.PDF

It's for the 60/60S but should be very similar.

Regards,
Scott

[breazr]

Thank you Scott.

I'll checked the link, the download started, but at 83% it stopped.

After that, when trying again (several times), it always generates a message like "thea meau site is inaccessible".

I also found a reference on meau site about that manual, but with no download link.

Anyway, thanks for your help.

For now, I succedeed to send/receive programs from/to PC/CNC, but I have no ideea how to set up the tools. That's why I badly need that manual. Trial and error is not a good ideea for setting the tools, I suppose

[bigbrian]

are you trying to only set tool length?

[guxiangdeyun]

MetLHead
: THANK YOU VERY MUCH !Ihave already download it . useful