Help.Overload on integrex 200SY

[xorp1]

Today i crashed tool into a workpiece.
Machine stopped at the moment with an overload error.
After a restart i noticed that a last gage(down left part of a screen) was showing 100% load eventough machine was idle.When i rotate the arm value decreases to a 20%,but when its still its a 100% or more of a load.After 10 minutes machine stops with overload error and thats it

[keebler303]

The boss is not going to be happy about this......sounds like its time to call in the service tech.

[xorp1]

tnx for pointin out the obvious