mazak for parts

[the66mustang]

got a mazak woodmilling 6 axis machine ,with these controlcards http://www.ebay.com/itm/YASKAWA-SERVO-CONTROLLER-CACR-SR-15BB1B7-Y288-CACR-SR-15BB1B7Y288-MAZAK-VTC-41-/180811250848?pt=LH_DefaultDomain_0&hash=item2a1930bca0

wanting to switch all the controls for other servo driver cards to control the machine with mach3 .
someone knowing witch card to use for these ?

mazak is 1990 6axis woodworking , about 30ft long !!! with vacuum and rotating spindel with compleet sk 30 toolchanger machine is compleet and working . [not ad the moment ]
gone sell the toolchanger and z axis with spindelmotor compleet and all the driver cards en interface card , releays ....... al whats inside the control tower .

want to get new drivers for the servo motors and let the compleet amchine working with mach3 .
someone can help me out how to get the wright drivers for these ?

[gridley51]

The Mach support forum is the place to ask.The CACR drives are analogue input and you need step and direction or an interface board.