Need Help!- Mazatrol 640 M R Register Bit Set Procedures

[mapleleaf]

Hi, guys,
i am not familiar with Mazatrol controller and I want to know how to set for instance R register R2105 bit E to 1 on Mazatrol 640M control. I know how to set out put bit but i do not know how to set register bit.

Detailed procedures would be much appreciated because I am new to this
control.



Thanks in advance guys.

[Shagman68]

I need the same info, except for R2108 bit F.

Sent from my HTC Sensation 4G using Tapatalk app.

[Shagman68]

Bump

Sent from my HTC Sensation 4G using Tapatalk app.

[mantenim]

•When monitoring R address, the address line contains the complete device name.

Example: File register R0002 is the entire line.
The first column is the address, the middle column is a 16 bit display of the data, and the last column is the 4 digit hex value of the address line.

A D D R E S S----F E D C B A 9 8 7 6 5 4 3 2 1 0-----H E X
R 0 0 0 2--------0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0----- 0 0 0 0

- Input the address you intend to write.
- Cursor right to the “HEX” column.
- Input the 4 digit hex word which will change the address to the new value.

•This system uses single characters, 0~F to represent a 4 digit binary number.
•In order to express all possible numbers with a single character, we assign a letter to represent 10 through 15
as shown below.
10=A 11=B 12=C 13=D 14=E 15=F
•Each 4 digit binary number set has a coded HEX value.

example
8 4 2 1----8 4 2 1 ---8 4 2 1 ---8 4 2 1 (HEX code)
F E D C ---B A 9 8 ---7 6 5 4 ---3 2 1 0 (binary)
0 0 0 1 ---0 0 1 0----0 1 0 0----1 0 0 0 (binary value)

HEX value 1 2 4 8


example
8 4 2 1---8 4 2 1---8 4 2 1---8 4 2 1 (HEX code)
F E D C---B A 9 8---7 6 5 4---3 2 1 0 (binary)
1 1 1 0---0 0 1 1---0 1 0 0---1 1 1 1

HEX value E 3 4 F