Results 1 to 3 of 3

Thread: VQC20/50B (stupid) newbie wants to fill spindle oil.

  1. #1
    Registered
    Join Date
    Oct 2011
    Location
    France
    Posts
    16
    Downloads
    0
    Uploads
    0

    VQC20/50B (stupid) newbie wants to fill spindle oil.

    Dear all,
    On my new VQC20/50B I've got an alarm saying that the spindle oil level is low.
    So I read the oil reference on the machine, I bought it and now I look everywhere for finding where the oil goes!

    I disassemble the spindle carter but I do not see any tank.

    I know that it is a stupid problem but does anybody have a picture or a PDF for finding where the tank is?

    I already found 2 tanks: the first (and biggest) is under the rotary tool holder, the second (very small) is just above the big air filter it seems to be connected on the air supply.

    Thanks a lot


  2. #2
    Registered
    Join Date
    Nov 2006
    Location
    Scotland
    Posts
    916
    Downloads
    0
    Uploads
    0
    Hi.The oil for the spindle is pumped from the oil cooler which is under the very small oil tank you have found.
    Send me your email and I`ll send you some info.


  3. #3
    Registered
    Join Date
    Oct 2011
    Location
    France
    Posts
    16
    Downloads
    0
    Uploads
    0

    Smile

    Thanks a lot


Similar Threads

  1. Stupid Software making me feel STUPID!
    By StilaR8dr in forum Bridgeport and Hardinge Mills
    Replies: 9
    Last Post: 01-03-2010, 11:12 PM
  2. Where do I fill spindle oil on BP series 1 CNC?
    By andy.f in forum Bridgeport and Hardinge Mills
    Replies: 10
    Last Post: 02-14-2009, 03:36 PM
  3. Need Help!- VQC20/40 Leaks air from bottom of spindle
    By apylus444 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 09-04-2008, 01:17 PM
  4. Incredibly stupid newbie question
    By touser in forum General Metalwork Discussion
    Replies: 13
    Last Post: 03-01-2008, 11:44 PM
  5. STupid newbie question.....
    By sentra52 in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 03-05-2004, 12:20 AM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.