| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-15-2005, 09:20 PM
| |||
| |||
Have a Mitsui HR-6 horizontal mill with a Fanuc 11M controller. The M code label on the side is in Japenese. So is the manual. Need to know the M codes for loading pallets. Have to load an oversized part without the door closing, and need to MDI the loading sequence one step at a time. I can fire the solenoids by hand, but what a pain! Thanks, Art Marshall. amars    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
11M M codes for Mitsui HR-6 
Linear Mode
