| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-17-2011, 06:39 AM
| |||
| |||
We have a Mazak Quickturn 200 with a Mazatrol 640T controller. We just replaced turret pins and indicated a pocket and tightened turret back down. Now in the past with other (older) machines we had to make changes as we had a new x axis call up number. Do we need to do that with this machine and if so where do we input this info?This is not my machine and I am not familiar with this controller. Thanks Dave  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- Losing position in y axis | jfrank3 | HURCO | 3 | 08-25-2010 12:42 PM |
| Need Help!- Storing an axis position | sidswiss | G-Code Programing | 11 | 02-20-2009 02:14 AM |
| Help needed with z-axis position | Spazdemon | AjaxCNC Control Products | 5 | 05-08-2008 11:24 PM |
| X2 y-axis motor position | Clot | Benchtop Machines | 8 | 03-12-2008 04:43 PM |
| x-axis losing position...??? | shnitzel | Servo Motors and Drives | 11 | 09-29-2007 12:46 PM |
| | |
Linear Mode
