| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-15-2011, 02:41 PM
| |||
| |||
I have a 2007 Mazak 350M with the Matrix control. We have a very difficult part that we are making and we have proved out the program and are making good LH parts. We want to switch over to the RH, and I am wondering if there is a Machine Tool function in the control to just mirror it, rather than reprogram the part. It is a difficult program with the 1st part a Mazatrol program and the last part a G code EIA program. Any help would be greatly appreciated. J  |
|
#2
01-23-2011, 08:32 PM
| |||
| |||
| Short answer no. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Postbuilder PP Mazak Matrix | Paul1234 | UG NX | 2 | 01-06-2011 06:57 AM |
| Need Help!- Mazak integrex 200-IV mazatrol matrix alarm 1281 | bor32 | Mazak, Mitsubishi, Mazatrol | 0 | 09-02-2010 01:59 AM |
| Mazak Matrix Tool Path Check | McGuiver | Mazak, Mitsubishi, Mazatrol | 4 | 07-30-2010 12:36 AM |
| HELP MAZAK MATRIX NEXUS | grants66 | Mazak, Mitsubishi, Mazatrol | 1 | 03-17-2009 08:57 AM |
| Please Help: Mazak QT250 Matrix Command help | panoptio | Mazak, Mitsubishi, Mazatrol | 1 | 07-08-2008 01:43 PM |
| | |
Linear Mode
