G10 Work Offset Setting?

[Wheelz]

Does anyone know how to set the Dynamic offset in an EIA program for G54.2 P:##

I have been using this successfully for Work Offset range G54.1

G10 G90 L20 P25 X-315.146 Y-281.120 Z-570.535 A-90.0 C90.0

but can't seem to find reference to G54.2 in the manuals.

Thanks,
Pete

[sld4121]

G10 G90(G91) L21 Pn IP
n = work fixture number
IP = reference fixture offset or reference angle of each axis

Under Rotary Table Dynamic Fixture Offset in the Fanuc Manual.

[Wheelz]

Thank you, that's brilliant.

Just tried it.