Mazatrol CAM M2 (CMT) To Mazak Micro Disk HELP

[wariat]

I have recently started using Mazatrol Cam M2 control I am new to this control. I am having trouble sending Program to and from my Mazak micro disk. I insert a disk with existing programs on it the screen Promts:
CMT (1)-(6)

Then i choose the first one and press start on the micro disk.

At the m2 control i go to Program, Program File, CMT I/O, LOAD CMT-NC, and in the Work No. i get a screen like this minus the tool parameter and wpc offsets,
Work No. (0) (0) (0) (0)
(0) (0) (0) (0)
(0) (0) (0) (0)
(0) (0) (0) (0)
I have tried to put the Work No. in across the 4 digit and individually.
then i press start on the micro disk and start on the m2 control in that order and I get a CMT Malfunction Error.

Can someone please help.

[newguy81]

Did you get your problem fixed?

[sanisz]

I do have the same problem with my machine. And i have a few more questions.
I found this Micro disk recently, i didnt eve know that we had this. Found a few programs aswell and was curious if its working. There are 3 oprions on how to load the programs to the machine. 1st one is kassette 2nd one is band 3rd is dnc. Which of these 3 should i use? And what format has the floppy be on (eisa/iso, cmt ?)

And i get the same window when i try to get the program loaded as "Wariat".

Help plz.

[wariat]

To Save Program
1. Turn On Micro Disk
2. Format Disk (Press#2 on Micro Disk then push set)
3. Push start button
4. Format again(Press #2 and set)
5. CMT 1-6 should appear on screen (you can put up to 6 programs on a 3.5 floppy) Press #1 and then push set
6. Go to Mazak Push these buttons:
-Program
-Program File
-CMT I/O
-Save
-Enter #'s (Program # you want to save it as up to 4 #'s)
-Input
-Start

To Load A Program
1. Insert Disk Into Micro Disk
2. Micro Disk Screen will show: 1-6 (pick # you saved program to and press )
3. Pick # (1-6) you saved program to on floppy disk and press Set
4. Go to Mazak and push these buttons:
-Program
-Program File
-CMT I/O
-CMT Load
-Enter the 4 digit number you save the program as (not the 1-6 number)
-Press Start

Hope this helps.

[sanisz]

Thanks for the help.