Coolant Tank Leaking

[mekp21]

Our shop has 2 Mazaks (1 lathe, 1 mill) both going on 20 years and both have been developing leaks. The lathe has actually had another bottom welded to the tank and the mill has large patches but now those are leaking as well. We are in trying to find something we can possibly line the tank with such as a Rhino liner type material but can't seem to find any info on the net.

We can't be the only ones with this problem so if anyone has any experience with anything like this it would be greatly appreciated to hear about it.

[bwprice100]

You could try a butile pond liner

Brian

[underthetire]

http://www.kbs-coatings.com/