| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mazak, Mitsubishi, Mazatrol Discuss Mazak, Mitsubishi and Mazatrol systems here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-29-2010, 12:52 PM
| |||
| |||
wondering if anyone has ever had any problem with the spindle chiller unit on their fh 6800. having lots of overheating isssues. oil level is good and condensor and evaporator are clean????  |
|
#2
06-29-2010, 05:24 PM
| |||
| |||
| Do you have the MAC or Daikin Chiller unit? Mac has a little condensor on the side of the controller about 6" x 8". I think it cools the hydraulic unit oil though so it is of no concern. Are the compressors cooling the oil before it sends it out to the spindle? The supply line out should be cool to the touch. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Alarm No.240 on FH-6800 | javedmasih | Mazak, Mitsubishi, Mazatrol | 2 | 04-17-2012 01:40 AM |
| X4+ Overheating | Des Jacobsen | Syil Products | 17 | 01-14-2009 11:58 AM |
| TORMACH CNC PCNC 1100 only $6800.00 ??? | twocik | Benchtop Machines | 4 | 08-21-2007 02:26 PM |
| Controller Overheating?? | Tazzer | AjaxCNC Control Products | 1 | 02-20-2007 02:40 PM |
| Router overheating | alarants | DIY-CNC Router Table Machines | 11 | 10-21-2005 10:39 PM |
| | |
Linear Mode
