How to program a chamfer cutter - M Plus


Results 1 to 5 of 5

Thread: How to program a chamfer cutter - M Plus

  1. #1
    Registered
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default How to program a chamfer cutter - M Plus

    Can anyone help me properly program a chamfer cutter with the Mazatrol M Plus unit? I can't seem to get away from the "chamfer cutter interference" error and also "Illegal tool for tool length measure" when trying to get a tool length measure from the automatic tool length measure feature.

    Thanks in advance,

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2007
    Location
    canada
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default mazatrol

    Hi. My name is Denis Paradis. I ahve a consulting company for machine shops that gives training on Mazak machines and MAZATROL programming. I travel pretty much everywhere in Canada and the USA. Let me know if you are interested.

    Denis Paradis

    Paradis Precision

    paradisprecision@hotmail.com



  3. #3
    Registered MrMazak's Avatar
    Join Date
    Dec 2007
    Location
    United States
    Posts
    300
    Downloads
    0
    Uploads
    0

    Smile Chamfer errors

    Error #1 is due to not having a large enough number in the radial and axial interference distances in your program. Error#2 is due to trying to measure a Chamfer Mill in Auto Measure Mode. Use Tool Measure Manual to due this. If you need more info let me know. Also be sure the Chamfer Mill is properly described in The Tool File or you will never cut a proper chamfer.



  4. #4
    Registered
    Join Date
    Nov 2008
    Location
    UK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hi,
    I too am having trouble cutting any chamfers using the M Plus, I used the M32 before with no problem.

    I have got the tool defined as having minor diameter 0 nominal 6mm and cutter angle 90.

    The program is trying to cut a 1mm chamfer on the top corner of the job.
    I have got the Z as 0 Z interference as 3(but have tried loads bigger and smaller) R interference as 3(again tried bigger and smaller) I cannot get rid of the "Chamfer Cutter Interference" 707 alarm.
    I have also tried putting .5mm as minor diameter but no joy.
    can anyone help?

    Thanks in advance.
    Gary



  5. #5
    Registered
    Join Date
    Nov 2008
    Location
    UK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Solution

    Hi All,
    Silly mistake.
    Changed cutter angle to 45 and all works ok

    Gary



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to program a chamfer cutter - M Plus

How to program a chamfer cutter - M Plus