Need Help! Re intializing T32


Results 1 to 8 of 8

Thread: Re intializing T32

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re intializing T32

    Hello To all,
    I have a QT-15 that suffered a dead battery before we purchased it. I successfully entered most of the parameters but still have an issue or two. The biggest issue is the control has no idea what turret position it is on. It will index but the tool # is still "0". I found a PDF file on a battery site BNP-b2991-39 that is for a T-Plus control. I suspect I have to initialize the control. But of course I don't know how to do this.
    If anyone can help it is much appreciated.
    I would have loaded the file I have but it is my first post so I was not allowed
    Thank you,
    Dave



  2. #2
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Re intializing T32

    Here it is!

    Attached Thumbnails Attached Thumbnails Re intializing T32-bnp-b2991-39-pdf  


  3. #3
    Registered
    Join Date
    Sep 2012
    Location
    Australia
    Posts
    86
    Downloads
    2
    Uploads
    0

    Default Re: Re intializing T32

    This is for M32 but should work for the T32 as well

    Attached Thumbnails Attached Thumbnails Re intializing T32-re-initilise-m32-pdf  
    Regards Bob


  4. #4
    Registered
    Join Date
    Sep 2012
    Location
    Australia
    Posts
    86
    Downloads
    2
    Uploads
    0

    Default Re: Re intializing T32

    I knew I had it somewhere

    Attached Thumbnails Attached Thumbnails Re intializing T32-re-initialise-t32-mc116-pdf  
    Regards Bob


  5. #5
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by sudsy View Post
    I knew I had it somewhere
    Thank you,
    Working on it now!



  6. #6
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by T-32 View Post
    Thank you,
    Working on it now!
    Strange, now I have a total of 8 tools but they are all in a total of 4 positions



  7. #7
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by T-32 View Post
    Strange, now I have a total of 8 tools but they are all in a total of 4 positions
    Data renewal not allowed.
    I have wiped the parameters clean using the dip switches. Reloaded the parameters from the eprom. But when i format the control the 424 alarm comes up.
    Parameters 37 thru 47 are set as our paperwork says. Something is up.
    We changed those parameters to the same values as another Mazak QT-18 with the same control but still data renewal not allowed.
    Not sure if anyone can help.



  8. #8
    Registered
    Join Date
    Sep 2017
    Location
    Bahrain
    Posts
    37
    Downloads
    0
    Uploads
    0

    Default Re: Re intializing T32

    Data renewal not allowed occurs due to improper formatting. After initializing using dip switches, there is procedure to format nc also. After this please load the parameters.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Re intializing T32
Re intializing T32