I have now located the most recent backups, anyone have experience with this mainte.exe for reloading the sram? The manuals do not have anything that I have been able to
Mazak 410A mill
Here is what I know please feel welcome to provide any input on how to proceed.
- Worked 100% fine until today
- Windows boots
- Fails to load M64 (Fusion 640) on startup, produces m64groupA.exe, m64groupB.exe, and m64misc.exe errors.
- HR113 board displays a 9 in the back
- On the computer DC IN = Green, DC OUT = Green, PS EMG = OFF, BAT ALM = RED
Similar Threads:
- Errors 122 and 175
- Problem- Mazak Nexus 410A CRASH
- Need Help!- Errors 190 and 192
- G71 Errors.....
- Need Help!- need script parameter for mazak 410a/640m
I have now located the most recent backups, anyone have experience with this mainte.exe for reloading the sram? The manuals do not have anything that I have been able to
Hi bak3r11
1) Please confirm the 7 segment status on drive unit.
2) Since the BATALM LED is on (RED), you need to check the battery voltage. The voltage should be in between 3.2V to 3.6V,, else please get it changed.
Please let me the know above two to guide further
The 7 segment display reads 9. The battery is 1v. Already got a new one.
Hi bak3r11, have you solved the issue?
After replacing the battery, you will have to initialize the sram by keeping the rotary switch of motherboard. After that format the nc data by going to diagnosis data erase. One this is done you can load the backup through mainte.exe