Mazak T32-3 Encoder reference position parameter

[jake_tb]

Hi Guys

Does anyone have a list of parameters for a T32-3 Mazatrol controller showing axis encoder reference position parameters? I have a parameter book but the pitch error comp parameters, machine parameters No. 5 - 11 and Machine parameter system parameters are omitted.
We had to remove the X axis encoders for machine repair and now the home reference position is 9mm out. I expect this will be a machine parameter that needs adjusting but our manual does not show this.
If anyone has a copy of a parameter manual that shows these parameters they could email me or just reply with the parameter number to adjust here that would be much appreciated
Jake

Similar Threads:

• Need Help!- M730MB parameter write and reference position set
• Altering reference position
• VMC1000 HH 426 Reference Position
• Parameter defining Encoder Position Accuracy
• Fanuc 0M Reference Position

[mazak-user]

Hi Jake, you use Viber?

Gesendet von meinem SM-N910C mit Tapatalk

[jake_tb]

Yep. User name: Jake T-B. Number +64 275002034