Hey everyone. I have a cnc machining center that runs Mitsubishi meldas M3/L3 and I am trying to set it up to drip feed.
My computer software is preditor cnc editor for bobcad.
Sending and receiving programs work perfect.
Dripfeeding works for about 20 lines then Gives me an I\O TAPE ERROR
I am using the cable that came with my cad software db9 to 25 pin but it's an Ethernet cable which plugs into each adapter.
(Db9/25pin)
On the computer side I have the following Rs-232settings.
Baud 4800
Parity even
Data 7
Stop 2
Flow- software
Timeout 5000
Machine side I have the following
Baud 4800
Stop 2bits
Parity effective -no
Even parity -even
Handshake-dc code
Dc code parity-even
Dc2/dc4 output- dc2 only
Cr output -off
I can get pics of whatever screen wants to be seen. I am at a loss for this.
Any help is greatly appreciated.

Tyler.


Sent from my iPhone using Tapatalk

Similar Threads: