For few weeks machine was acting strange, booting up in like 8-9 attempts, whitescreening and now i am getting alarm 33 emergency stop.
There was a thread where someone else had the same issue but after trying all the tips from that one nothing changed.
All the drives are flashing E7 and FX numbers.
Machine was rebooted several dozen times already and nothing helps.
I have order for Tuesday and program is written, can anyone please help me with getting my machine running?
Thank you in advance
Similar Threads:
Hallo, give a picture of the monitor
Initialisation at firstG'day all,
I have recently purchase a multiplex 620 with T32/6 controller very cheap because it hadn't run for quite a while. I have finally had time to power it up and after fixing the problem with the monitor I get a system check error. I have all the codes and most of the manuals but no mention of this error. Any ideas???
For few weeks machine was acting strange, booting up in like 8-9 attempts, whitescreening and now i am getting alarm 33 emergency stop.
There was a thread where someone else had the same issue but after trying all the tips from that one nothing changed.
All the drives are flashing E7 and FX numbers.
Machine was rebooted several dozen times already and nothing helps.
I have order for Tuesday and program is written, can anyone please help me with getting my machine running?
Thank you in advance
Gesendet von meinem SM-N910C mit Tapatalk