Hello,
When I am programing a Drilling cicle in my Mazatrol M32 appears the alarm pictured exactly at the moment when I put the spindle speed in automatic.
I think is very strange ....any thoughts?
Thank you. In advance.
Enviado desde mi GT-I9500 mediante Tapatalk
Similar Threads:
Yes, putting the values of cs-p & feed manually, there is no problem at all. But doing that automatically the cnc freezes up, and it is necessary to reinitialize the machine completely.
Enviado desde mi GT-I9500 mediante Tapatalk
Sound like you need to clear or check your cs and feeds values in the mazak somethings is conflicting with the parameters. There should be a menu page where for different materials with cs & feeds.
Hi Dear
1st solve the battery problem . The CPU is getting down and the memory is getting corrupted .
this is not a programming issue.
There is no alarm at all. Machine is alarm clean until press the auto cs and feed button.
Enviado desde mi GT-I9500 mediante Tapatalk
It be in one sub menus connect to the materials menu sorry not where it is on your mazak!!
OK. Thank you.
Enviado desde mi GT-I9500 mediante Tapatalk