Need Help! Fanuc cnc series oi-md


Results 1 to 5 of 5

Thread: Fanuc cnc series oi-md

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Romania
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Fanuc cnc series oi-md

    Hello guys, i need to find parameters for SBK and FEED HOLD buttons and i don't find anywhere about them. I search in parameters manual but nothing.

    Please help me.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2008
    Location
    Viet Nam
    Posts
    102
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc cnc series oi-md

    Hello Butechi.
    You can see the activity of SBK and Feed Hold button by selecting the SYSTEM -> PMC-> PMCDGN-> STATUS to find down their address, then use it's address to find in the ladder.



  3. #3
    Registered
    Join Date
    Feb 2017
    Location
    Romania
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc cnc series oi-md

    Thanks for reply.
    Can the button FEED HOLD be activeted from parameters or i need to make modification in ladder?



  4. #4
    Registered
    Join Date
    May 2008
    Location
    Viet Nam
    Posts
    102
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc cnc series oi-md

    Quote Originally Posted by Buterchi View Post
    Thanks for reply.
    Can the button FEED HOLD be activeted from parameters or i need to make modification in ladder?
    Dear Buterchi.
    Usualy the FEED HOLD button activated in ladder and named as *SP( G008.5), the LED is *SPL(F000.4). You can see the status of these signal by selecting PMC-> PMCDNG-> STATUS-> key in G08-> Enter and see on sreen( remember that Fanuc named the address as 7-6-5-4-3-2-1-0, that's mean the righ most work is .0), or you can tracking it by entered it's address in ladder monitor( usualy it's allways used OC contact, what's that meaning of * signal).



  5. #5
    Registered
    Join Date
    Feb 2017
    Location
    Romania
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc cnc series oi-md

    Hello guys, I solved the problem with FEED HOLD, so when i press it the spindle stops from rotation.The solution was a internal relay that needed to be activated.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc cnc series oi-md
Fanuc cnc series oi-md