Page 1 of 2 12 LastLast
Results 1 to 12 of 18

Thread: Programming Mazatrol T1

  1. #1
    Registered
    Join Date
    Jan 2007
    Location
    cro
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Programming Mazatrol T1

    Please help me with programming mazatrol T1. I have experience with G-code.

    I need:
    - manual (part with examples)
    - simple software (like the one on the CNC) to edit, save and write programs on PC
    - communication software (CNC- PC)

    Best regards.

    Similar Threads:
    Last edited by diz; 01-26-2007 at 01:23 PM.


  2. #2
    Registered
    Join Date
    Jun 2006
    Location
    USA
    Posts
    478
    Downloads
    0
    Uploads
    0

    Default

    does your t1 use g-code or just Mazatrol?

    A.J.L.


  3. #3
    Registered
    Join Date
    Jan 2007
    Location
    cro
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    just Mazatrol



  4. #4
    Registered
    Join Date
    Aug 2005
    Location
    usa
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default

    for a manual - Mazak USA 800-331-9151 - (its too huge to copy-sorry)
    for editing and downloading software - www.solutionware.com (or www.solution-ware.com ??)

    Where is cro - thats all your location showed?



  5. #5
    Registered
    Join Date
    Jan 2007
    Location
    cro
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by underdog View Post
    for a manual - Mazak USA 800-331-9151 - (its too huge to copy-sorry)
    for editing and downloading software - www.solutionware.com (or www.solution-ware.com ??)

    Where is cro - thats all your location showed?
    Cro - means Croatia this is a little country in Europe on Adriatic sea

    I need just a simple editing software(english language) to make programs on computer and send them to cnc because I have Swedish language on My cnc so it's very complicate to make programs on it



  6. #6
    Registered
    Join Date
    Jun 2006
    Location
    USA
    Posts
    478
    Downloads
    0
    Uploads
    0

    Default

    the only CAM software that I'm aware of comes directly from Mazak I think it's called MazaCAM

    A.J.L.


  7. #7
    Registered WayneHill's Avatar
    Join Date
    Mar 2004
    Location
    Michigan
    Posts
    746
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ajl6549 View Post
    the only CAM software that I'm aware of comes directly from Mazak I think it's called MazaCAM

    MazaCam is made by Solutionware in San Jose, California.

    http://www.mazacam.com/whatis.html

    Also look for Camlink to edit Mazatrol programs

    http://www.griffobros.com/

    Wayne Hill


  8. #8
    Registered CNCRim's Avatar
    Join Date
    Feb 2006
    Location
    usa
    Posts
    949
    Downloads
    0
    Uploads
    0

    Default

    Diz

    My $.02, your demand Mazatrol offline programming will cost you few thousand..... Mazatrol is very different from other CNC language and you can't edit program without special software.

    The best way to learn is trial error.


  9. #9
    Registered
    Join Date
    Nov 2006
    Location
    USA
    Posts
    154
    Downloads
    0
    Uploads
    0

    Default

    For my $.02, one CAN edit a mazatrol program in, believe it or not, "notepad" which is in Win95, 98, and XP. I have used this many times after downloading from the machine to a laptop using Procom software.
    Steve



  10. #10
    Registered CNCRim's Avatar
    Join Date
    Feb 2006
    Location
    usa
    Posts
    949
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Newby2 View Post
    For my $.02, one CAN edit a mazatrol program in, believe it or not, "notepad" which is in Win95, 98, and XP. I have used this many times after downloading from the machine to a laptop using Procom software.
    Steve
    Steve,

    Are you talking about 3-digit G-code or CMT Mazatrol? If you are successeful edit CMT Mazatrol show us how, I learn something new everyday.

    The best way to learn is trial error.


  11. #11
    Registered
    Join Date
    Dec 2006
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    For saving/loading files you can use windows HyperTerminal works good and itís free, or do Google search for free DNC lots of them around.
    Marcin



  12. #12
    Registered
    Join Date
    Aug 2005
    Location
    usa
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Steve/Newby2-WOW

    Steve/Newby2,

    WOW if you have been able to get Mazatrol out of a controller, edit it and get it back in without the use of multiple thousand dollar programs, PLEASE share! Many of us would put an icon on our screen for you if you have performed this feat.

    We'd like to know - version of Procomm, Mazatrol controllers you've used this with and any settings needed to make it work (type of data cable or pinouts etc)

    Many thanks



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed