Results 1 to 2 of 2

Thread: mazak qt 200 640T back up parameter

  1. #1
    Join Date
    Aug 2011

    Smile mazak qt 200 640T back up parameter

    i have mazak QT 200 with control 640T PC FUSION CNC, now alarm ILLEGAL PARAMETER, how i can get back parameter?? could i read parameter on Hard disk of PC?

    Similar Threads:

  2. #2


    You may be able to check if there is a backup of parameters on the Hard Drive of the control. Go to Data I/O page and press Hard Drive button. Press Directory Select and choose one of the directories from the list. Press HD Content button and then Start. If Machine Parameter highlights then that would be a backup of parameters. If it does not highlight try to select another directory from the Select Directory button and check the contents again as before. Hopefully you can find a copy.

    You can also check the electrical cabinet for a floppy disk that may also have a backup copy of parameters. To check you would do the same steps as above but press Floppy instead of Hard Drive.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts


    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed