3dprintforums logo

CNCzone Network:  RFQwork :: 3Dprintforums :: Welderzone :: Google+ :: Our Facebook :: Twitter :: SiteMap



Results 1 to 3 of 3

Thread: Mazatrol T2 - alarm 293

  1. #1
    Registered
    Join Date
    Aug 2008
    Location
    Poland
    Posts
    5
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Mazatrol T2 - alarm 293

    Hi all.
    I have problem with Mazak QT8. After press start, display alarm 293. In documentation code this alarm - optional sensor 4. What is this? Please help me.

    Regards

    Gelos

    Similar Threads:
    Last edited by gelos; 06-12-2010 at 09:04 AM.


  2. #2
    Registered
    Join Date
    Jul 2006
    Location
    USA
    Posts
    19
    Downloads
    0
    Uploads
    0
    Rep Power
    0
    Going from memory, I believe the tailstock quill was not homed after E-stop was pushed.

    Solution: Extend tailstock quill and then retract it. Should work.



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    Poland
    Posts
    5
    Downloads
    0
    Uploads
    0
    Rep Power
    0
    In my machine tailstock is removed. Limit switch in tailstock box was moved. After set the limit switch problem is solved. Very thanks.



Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed