How to: MC to post I, J, K instead of R

[AKcrabber]

how do i change this?

[CNCRim]

Open the post itself the one you will post it with, and look for I J K or R, I think 0 for I J and 1 for R all you have to do is change it to 1 save and all done.

[ObrienDave]

Open your .pst file in a simple word processor.

Look for:

arcoutput : 1 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180

Change to:

arcoutput : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180

Save .pst file

[Limpan]

Hi, what Mastercam version do you have? I asked one of my Mastercam support guys in Sweden and he told me to go trough "Settings" - "Control Definition" and from there select "arcs" in the field to the left and in that menu I could change from "Radius" to "Delta from start to center". (I´m using Mastercam X3)

[cadcam]

Follow what your dealer said to do. example of were.