Need Help!- surfaces connection -mastercam X2

[basim]

hello freinds,

i have 2 surface that i use to make sharp corner in MDF door with a router.

i use the flowline 3d tool path to "remove" the internal tool radius after milling.

this option is working good and the finish also.

the problem that it takes more than 1 minute to finish 1 corner(2 surfaces to gether).

the machine works in each surface separetly and after that continue to the other one.

i ask if i can "merge" the 2 surfaces at the corner to one suface so the machine will process the job more quickly.

i think that i can save about 40% time.

any body can help!!!!!!!!!!!


regards,

Basim