Need Help!- How to do this toolpaths? With models

[yanlo]

I am a newbie~

I have try the Radial, parallel toolpath.
But i cannot finish the milling of model especially the letters cavity.
Pls kindly help me!! Pls.
What kind of toolpaths u will use and ur setting?
MAny Thx!!!

The model (.EMCX) in a zip file
http://rapidshare.com/files/334632912/COIN.zip.html

[yanlo]

CAn Anyone help me?

[tobyaxis]

There will be someone along soon.

[Matt Berube]

I'd be more likely to help if you could come up with a *.mcx file instead of *.emcx or possibly a parasolid (*.x_t) model...

Is that possible ?

[daver59]

just a few questions
was this done in art?
if it was not i had a similiar problem before where the letters were not above the surface that you are cutting on- make sure the letters are above the actual surface
please resend the file as amc file
dave

[yanlo]

http://rapidshare.com/files/336043309/COIN.zip.html

This zip inculde iges, stl and emcx

Thx~!

[yanlo]

http://rapidshare.com/files/336044794/coin1.zip.html
here is .mcx and .step.

Rhx for ur help~!

[Matt Berube]

http://www.box.net/shared/vvofhpqy8f

Here is an updated version showing a finishing strategy I use nearly every day.

Sorry but I switched the file to inch units so I could use my default settings and tools.

[yanlo]

thx for ur help~ Matt

But I unzip ur file .
The file inside cannot open.
MAstercam said it was corrupted.

Would u upload again ~ ?

Thx again~

[brandou10l]

been trying for 30min to download ur file and to no avail

[Matt Berube]

Aww crap...

My file is X4 and you must be using an older version...

Any chance you can try it in X4 ?

[Matt Berube]

Brandou, I just downloaded it fine from here which is a totally different location from where I created and uploaded the file...

The trouble downloading must be on your end, I think...