Newbie- Mastercam X3 Lathe

[troy676zsj]

I'm having a problem with the approach angle on my Haas HL-2 lathe when using the tail stock. How do I change the approach to stay out of the
restricted area of the tail stock when I'm coming from the home position? Is
there a place in Mastercam Lathe to set that up? Thanks in advance for any help.

[CNCRim]

Under Parameter look for approach point and retract, pick/input the number you want .... and you can choose rapid/feed into the part.

[CNCRim]

Under Parameter look for approach point and retract, pick/input the number you want .... and you can choose rapid/feed into the part. And your case you want to feed instead rapid.

[troy676zsj]

Thanks,,I'll give that a try