Problem- x4 Contour and Depth

[vdauer]

I'm having problems with the incremental and absolute depths. If I choose the incremental the z depth with behave as if it is absolute. I can get around that. The main problem with x4 is contouring. After verify I measure the contour and it is undersized. I verified the model, geometry, tool compensation, and wall allowance. I would have to compensate the tool wall allowance in the tool parameter settings to correct the problem. I don't trust that and I'm going back to x3 until the problem is fixed. Does anybody else have this problem or know of a fix. I have downloaded all fixes from master-cam to no avail.

[budgieW]

Odd it works OK here

[psychomill]

??

Check your code first. If that is correct based on your programming parameters and comps that you've "checked"... It's not MasterCam.... it's your set up/machine not cutting the number...