Verifying in X3

[cpl]

I have a problem when I try to verify in X3 whenever I click on the play button nothing happens anyone have any idea what the problem could be?

Thanks in advance

[Mike Mattera]

Did you define a stock boundary for your toolpath? Do you see the stock when you go into Verify?

Or... Your toolpath isn't any where near the stock.

Select the Tool at the top of the Veriofy control panel and zoom out to see if it's cutting out in space somewhere.

Mike Mattera

[cpl]

Hi Mike,

Thanks for the reply yes I did define a stock boundary but as soon as I hit the verify button the geometry dissapears.

http://yfrog.com/89mastercamj

[Mike Mattera]

Are you hitting thre green check button at the bottom of the page, or the "Machine" arrow on the VCR controls at the top?

The green check just exits verify.

Mike

[cpl]

I'm hitting the machine arrow.

As soon as I hit it all of the other arrows are grey'd out except the rewind arrow.

[thebowman]

Originally Posted by cpl I'm hitting the machine arrow. As soon as I hit it all of the other arrows are grey'd out except the rewind arrow.

If you post the file I'll look at it and see if I can Verify it.

[Mike Mattera]

Do a Backplot. I'm guessing there is no toolpath to verify.

Mike Mattera

[cpl]

Backplot works fine!

Originally Posted by Mike Mattera Do a Backplot. I'm guessing there is no toolpath to verify. Mike Mattera

[cpl]

Originally Posted by thebowman If you post the file I'll look at it and see if I can Verify it.

I'm having trouble uploading the file can I email it to you?

[thebowman]

Originally Posted by cpl I'm having trouble uploading the file can I email it to you?

Use www.mediafire.com to upload it so everyone who wants to can offer their opinion. You don't have to join or pay to use MediaFire.

[cpl]

I hope this works!

http://www.mediafire.com/?0hwem2rmnwr

Thanks for your help

[thebowman]

Your file solid cut part Verify's with no problem in X4.

Have you tried completely closing Mastercam X3 and then restarting Mastercam to see if this file will solid cut part Verify properly?