Problem- Master Cam Upgrade

[Dwayne Foy]

[QUOTE1] I have three Cam packages Esprit, Bodcadcam, Mastercam, I have mainly been using Mastercam it is a older rev. 8.1.1. Don't have the money to buy newer rev. of Mastercam is there anything out there that is cheaper that will compare to Mastercam. Do alot of 3D motorcycle parts with engraving running Soildedge rev. 9 Soildworks 2005. Using Millright to do some of engraving.

Thanks
Dwayne Foy [/QUOTE1]

[cadcam]

Not really, there are allot of packages but matters what you need to what level you have.
the version you are running now has sun setted and lost its value with upgrading.

[Dwayne Foy]

What are Mastercams costs to upgrade to new rev. 3D surface and or 2-1/2 milling ?

Dwayne

[Dwayne Foy]

What are Mastercams costs to upgrade to new rev. 3D surface and or 2-1/2 milling ?

Dwayne

[Mike Mattera]

Hi Dwayne,

You should really contact your dealer for costs.

First, we dont know what you have, to tell you the cost to upgrade.

Second, as Cadcam stated above with the word "sunset". That means that your software is so old it may not be upgradable. It's not much different than a car. Every year it gets a little older and it's trade-in value is less and less until it's not worth anything anymore.

But it's best to contact your dealer and get the real story about what YOU have.

Mike Mattera