Problem- Using STL file in mastercam and Define stock At Rough Flowline

[mindofrain]

Hİ,

I am using mastercamX.
At Rough Flowline operation I cant define stock.
I am writing stock parameters but Mastercam didn't use stock.
Tool must starts operations on top of stocks, but tool starts operations top of part.
How can define stock?


And I want to define stock with stl file.
I can load stl file but mastercam doesnt use this stock.
Tool starts operation top of part.
I want to machine to cast iron.
I must define amorph shape stock.
And mastercam must use this stock.
How can I do?

Thank you very much.

MastercamX (10.0.12.2)

[rdpdo]

Hello !!

I've got the same problem, do you ahve found a solution ?
Regards.

[Limpan]

If you can zip and post both the .mcx and .stl file I can take a quick look at it.

[rdpdo]

Hello,

Thanks you for your help. Here is some .ZIP:

First problem : MANCHE1.ZIP

In MANCHE1.ZIP, I'm trying to make a pocket from stock with a maximum cut deph of 0.2. But Mastercam create a toolpatrh that cut all the stock before the part (more than 0.2).

Here is a view :



Second problem : MANCHE2.ZIP

Here I'd like to make a surface row flowline and cut only what is necessary (from the stock). But mastercam create a toolpath that cut even out of the stock.

Here is the view :



If you have an idea to solvbe this ? Thanks you very much